
Add to Cart
Priority steering system forklift 3 ton FD30 diesel forklift with fork positioner
Features of Priority steering system forklift 3 ton FD30 diesel forklift with fork positioner
ex.1 Tips on Hydraulic Oil
1 Keep the hydraulic system clean. Avoid water, other oils, dirt and other impurities mixing with oil.
2 The oil tank should maintain at a certain height. The oil temperature should not exceed the permitted range during operating.
3 Hydraulic piping system should be thoroughly cleaned when changing the oil. The new hydraulic oil must be filtered before injection in oil tank. We recommend to replace hydraulic oil after using one year.
4 Can not replace the hydraulic oil with waste oil.
ex.2 Tips on Tires
1. Always check
2. One should regularly change the tires left and right for the two tires wearing of the two tires are not the same.
3. Ensure the left and right tires are the same when changing the old tyre. Try your best to make sure the tyre before and after are the same too.
4. Do not overload, partial load.
5. Reasonable driving, minimize the brakes
6. Safekeeping. Anti-sun, anti-high temperature or burning, anti-acid or oils corrosion, anti-moisture.
The specifications of Priority steering system forklift 3 ton FD30 diesel forklift with fork positioner
4 | Load center | mm | 500 | ||
5 | Power unit | Diesel | |||
6 | Operator type | Driver/seat | |||
7 | Tire type | Pneumatic | |||
8 | Wheel | Front/rear | 2/2 | ||
10 | Free lift | mm | 150 | ||
12 | Tilt range | Mast forward/backward | deg | 6/12 | |
13 | Overall length(without fork) | mm | 2705 | ||
14 | Total width | mm | 1225 | ||
15 | Mast height (fork lowering) | mm | 2075 | ||
16 | Overall height fork raised | With backrest | mm | 4250 | |
17 | Height to head guard | mm | 2140 | ||
18 | Turning raduis(outside) | mm | 2445 | ||
19 | Front face of fork to front axle | mm | 480 | ||
20 | Min. right angle stacking aisle | without load length&clearence | mm | 2925 | |
Performance | 21 | Speed | Max Travelling full/no load | km/h | 18/19.5 |
22 | Lifting full/no load | mm/s | 450/500 | ||
23 | Lowering full/no load | mm/s | 450/450 | ||
24 | Max.drawbar pull | Power shift T/M full/no load | kg | 1500/1000 | |
Manual shift T/M full/no load | kg | 1550/1000 | |||
25 | Gradeability at 1.6km/h | Power shift T/M full/no load | % | 18/20 | |
Manual shift T/M full/no load | % | 18/20 | |||
Weight | 26 | Truck weight | kg | 4380 | |
27 | Weight distribution | Full load front/rear | kg | 6490/890 | |
28 | No load front/rear | kg | 1670/2700 | ||
Frame | 29 | Tires | Number | front/rear | 2/2 |
30 | Model | front axle | 28x9-15-12PR | ||
31 | rear axle | 6.50-10-10PR | |||
33 | Tread | Front/rear | mm | 1000/970 | |
35 | Brake | Service brake | Hydraulic-foot pedal | ||
Parking brake | Mechanical-hand lever | ||||
Engine | 36 | Battery | Voltage/capacity | V/AH | 12/80 |
Rated power | kw/rpm | 34.3/2500 | |||
Rated torque | N.m/rpm | 138/1800 | |||
Number of cylinders | 4 | ||||
Placement | L | 2.369 | |||
Fuel tank capacity | L | 70 | |||
38 | Transmission | Speed forward/backward | Power shift T/M Manual shift T/M | 1-1 power shift T/M 2-2 manual shift T/M | |
39 | Operating pressure | Hydraulic system pressure | kg/cm² |
LTMA 3 Ton 4500mm triplex mast diesel forklift with free parts
After-sale service
Nowadays we have been sell more than 100 countries. All the products of LTMG supplied withone year or 2000 working hours (which occurs first) period quality warranty.
If the machine have any problem within the warranty time, but not caused by man-made, we will send you spare parts for free.
Detail clauses and policies please see to our website and product's quality certificate.