Xiamen LTMG Co., LTD
LTMG MAKES LIFTING EASIER
Add to Cart
2.5 ton electric forklift truck with triplex mast 6.5m lifting height
Main Features
Maintainability
Engineer cover has a large opening angle (with self-locking gas spring) so that the storage battery can be easily repaired.
The closed electric cover plate prevents electric parts from rain and dust erosion.
IP54-level walking motor can resist against dust and water, with high reliability.
2-ton and 2.5-ton single-drive forklift’s innovative three-door structure – one door respectively on the left, right and back side of the forklift enables the motor, oil pump and electronic controller to be conveniently repaired, with good water and dust prevention effect and little noise. 3-ton single-drive forklift’s two-door design – one door respectively at the right and back side, with movable cover plate enables motor, battery, oil tank, oil pump and electronic controller to be conveniently repaired, with good water and dust prevention effect and little noise.
The specification of 2.5 ton electric forklift truck
| Technical secification of battery forklift-AC motor | |||||
| Features | 1 | Manufacturer | LTMG | ||
| 2 | Model | FB25 | |||
| 3 | Load capacity | kg | 2500 | ||
| 4 | Load center | mm | 500 | ||
| 5 | Power unit | Battery ,diesel ,gasoline | Battery | ||
| 6 | Operator type | Driver/seat | |||
| 7 | Tire type | Front/rear | Air tires | ||
| 8 | Wheel | Number Front/rear | 2X/2 | ||
| Dimension | 9 | Max. lifting height | mm | 6500 | |
| 10 | Free lift | mm | 160 | ||
| 11 | Fork size | L*W*T | mm | 1070*122*40 | |
| 12 | Tilt range | Mast forward/backward | deg | 6-12 | |
| 13 | Overall length(without fork) | mm | 2285 | ||
| 14 | Total width | mm | 1150 | ||
| 15 | Mast height (fork lowering) | mm | 1995 | ||
| 16 | Overall height fork raised | With backrest | mm | 4030 | |
| 17 | Height to head guard | mm | 2145 | ||
| 18 | Turning raduis(outside) | mm | 2000 | ||
| 19 | Front face of fork to front axle | mm | 445 | ||
| 20 | Min. right angle stacking aisle | not add load length&clearence | mm | 1935 | |
| Performance | 21 | Speed | Max Travelling full/no load | km/h | 13.5/14.5 |
| 22 | Lifting full load | mm/s | 240 | ||
| 23 | Lifting no load | mm/s | 450 | ||
| 25 | Gradeability | full load | % | 12.5 | |
| Weight | 26 | Truck weight | kg | 3820 | |
| 27 | Weight distribution | Full load front/rear | kg | 5425/895 | |
| 28 | No load front/rear | kg | 1425/2395 | ||
| Frame | 29 | Tires | Number | front/rear | 2/2 |
| 30 | Model | front axle | 21x8-9-16PR | ||
| 31 | rear axle | 18x7-8-14PR | |||
| 32 | Wheelbase | mm | 1400 | ||
| 33 | Tread | Front/rear | mm | 955/950 | |
| 34 | Ground clearence | At lowest point(mast) | mm | 110 | |
| Frame | mm | 115 | |||
| 35 | Brake | Service brake | Hydraulic-foot peda | ||
| Parking brake | Mechanical lever | ||||
| Electric motor and controller | 36 | Battery | Voltage/capacity | V/AH/5hr | 48V-565 |
| 37 | Weight (standard) | kg | 945 | ||
| 38 | Electric motor | Driving motor | kw/60min | 8 | |
| 39 | Hydraulic driving motor | kw/5min | 8.6 | ||
| 40 | Control type | Electric driving | 1 | ||
| 41 | Operating pressure | Hydraulic system pressure | kg/cm² | 175 | |
| NOTE: 1.Drving AC choppedwave control mode /lifting AC voltage control mode | |||||
After-sale service
Nowadays we have been sell more than 100 countries. All the products of LTMG supplied with one year or 2000 working hours (which occurs first) period quality warranty.
If the machine have any problem within the warranty time, but not caused by man-made, we will send you spare parts for free.
Detail clauses and policies please see to our website and product's quality certificate.
Our company
FAQ
1.What Certificate do you have?
LTMG workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2. Can you customize and design as the clients' requirement?
LTMG will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the LTMG warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, blance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.Delivery time:
Standard configuration products are always in stock.
The production period of Customizing products is 30 days.